Serial ATA SATA Discs

SATA, Serial ATA .SATA of ‘ya at the moment and that most users use the CD-ROM, RW, DVD disk, such as a longer time to connect the reader to use my chest has evolved is a form of parallel assignment.

SATA standard more thin, ergonomic cable and the use of less number of pins possible just a short distance away veriyor.Ayrıca Parallel data transmission speed of data transmission in the Performing etkiliydi.Uzun distance, but the rate fell significantly. This is because the number of bits in the long distance to go in a random speed and therefore its occurrence was a mess. Also, 40 or 80-pin parallel cables, as they are thick because of the structure were not flexible enough. Therefore, the air circulation inside the case were also affected.

Other than the number of pin SATA connection low. Serial ATA just a cable for 6 or 8 core. The number of these vessels was 40 in the parallel cable, even with Ultra ATA 66 and 100s out also the number of vessels was 80. Serial connection is not possible in the time delay to happen. Because the serial port, parallel port signaling the contrary is made from a single channel.

SATA and PATA (Parallel ATA) data cable size difference between the high
Cumbersome and do not want to use the EIDE cable SATA-capable motherboard users with the help of an adapter for PATA hard disk SATA data cable can be inserted.

Now we will install Windows XP on SATA disks we will introduce how our XP installation gelelim.Windows here for information about installing XP yapıyoruz.Windows this screen during the encounter when we tıklayın.Kurulum “F6″ or push you.
“F6″ or after a while seems like when we did not have anything against us this screen to add a new device in gelecek.Biz “S” will press.

Immediately after the driver disk that comes anakartımızla us before installation to create or isteyecek.Disketiniz probably gerekir.Büyük these drivers from the motherboard or motherboard companies that produce the CD is in there from the internet can insert indirebilirsiniz.Disketimizi “Enter” button are

That name was read from the floppy disk drive and confirm for us to display a query arrived. “Enter” button give approval

Speaking about the SATA drives into saying you got a few details vereyim.SATA (serial set) if there is a supporting URL hdd I suggest you do not install win98.
a new technology to sell technology because it still win 98 setup and configure the BIOS settings is not supported olası.ama set to sell part of edebilirsiniz.biosta configure the enhanced mode, it “compatible” fashion bring diyorsanız.anakart illede 98 kurca I need desteğide.

What is sold: parallel ATA technology had advanced halidir.2002 also released sanırım.şuan Maxtor, Seagate and well-established companies often sell for as much as the technology supports.
süper bi data transfer speed up to 150MB per second is the event.
all devices that are supported pata disk, dma6 mode, atapi devices, CDRW, DVD can be connected to devices such as supports.
with the operating system you use does not cause a problem, has nothing to do with that OS.
A small number of pins in the cable boxes that will put an end to the salad.
SATASATA What is it? SATA (Serial ATA) Parallel ATA physical storage interface used for the new standard is developed instead. IDE interface Parallel ATA, which come in the last point, the Ultra ATA-133 with 133MB per second data transfer while supporting the theoretical as 600MB per second data transfer rate can reach the SAT with the potential of today, life is consumed in the stalemate that may take place is the best solution.
The data cable to the SATA IDE has a different structure.

SATA Advantages

In the future, 600MB / s data transfer rate can reach up to SATA considered, these standards developed by the group today, the lowest transfer rate up to 150MB / s will be guaranteed. Even in this state, SATA is faster than the peak point of stalemate.

SATA data cables, IDE cable compared to a standard 40 or 80 pinlik thinner and more flexible to have a structure that, in the case would be effective in reducing the hassle of wires. Naturally, this situation air circulation inside the case will be affected positively.

Unlike the bus topology pata SATA’larda some users that can confuse Master / Slave settings to control who does not have jumpers.
SATA Setup function ayargoster (chipset) (if (chipset == ‘intel’) intel.style.display = ‘block’; else intel.style.display = ‘none’; if (chipset == ’sil3112′) sil3112.style . display = ‘block’; else sil3112.style.display = ‘none’; if (chipset == ‘VT8237′) vt8237.style.display = ‘block’; else vt8237.style.display = ‘none’; if ( chipset == ’sis180′) sis180.style.display = ‘block’; else sis180.style.display = ‘none’; if (chipset == ‘no’) yok.style.display = ‘block’; else yet. style.display = ‘none’; isim.innerText = cards.options (cards.selectedIndex). innerText; / / this.options [this.selectedIndex]. value;) according to the controller on the motherboard installation procedure is described below.

SATA Controller Intel South Bridge SATA drives are fitted if the standard SATA port, on this disk when installing Windows do not require any advertisement is an extra, this south bridge provides more direct SATA’ları discs.
SATA drives are recognized directly in the BIOS can see.

NOTE: SATA disk is inserted and the ports if the RAID disk to install Windows to a different installation method is desired to be followed (this method will be discussed in the article RAID).

SATA Controller SATA drives Silicon Image SII 3112 before installing the operating system must create a driver disk. Disk drive, motherboard CD in the “\ Drivers \ SATA” directory to copy files into a floppy disk with a blank can be prepared .. Then at the start of the Windows installation “Third-party SCSI or RAID driver, press F6 if you want to install …” ib **** i appears by pressing F6 (you may need to press several times) SCSI RAID promote the arrival of the menu will be provided. Menu when “S” button to specify an additional device stage is reached. Place the prepared floppy disk at this stage “Enter” to continue with.

SATA drives during Windows setup to identify the system you need to press F6 on the screen is
Then the next screen “S” button, the Windows installation that you previously saved to the floppy disk drive is provided to scan

Finally, this screen may come in more than one drive, you’ve set up the situation by checking the appropriate option “ENTER” key to continue.

VT8237 South Bridge Chipset SATA Controller

SATA drives before installing the operating system must create a driver disk. Disk drive, motherboard CD in the “\ Drivers \ VIARAID \ DriverDisk \ Make Disk.exe” program can be created with. Then at the start of the Windows installation “Third-party SCSI or RAID driver, press F6 if you want to install …” ib **** i appears by pressing F6 (you may need to press several times) SCSI RAID promote the arrival of the menu will be provided. Menu when “S” button to specify an additional device stage is reached. Place the prepared floppy disk at this stage “Enter” to continue with.

SATA drivers during Windows installation to the system you need to press F6 to introduce the screen can be seen.
on the screen “S” button, the Windows installation that you previously saved to the floppy disk drive is provided to scan
Finally, this screen may come in more than one drive, you’ve set up the situation by checking the appropriate option “ENTER” key to continue.

SIS 180 SATA Controller

SATA drives before installing the operating system must create a driver disk. Disk drive, motherboard CD in the “\ Drivers \ RAID \ SiSRAID \ MakeDisk.exe” program can be created with. Then at the start of the Windows installation “Third-party SCSI or RAID driver, press F6 if you want to install …” ib **** i appears by pressing F6 (you may need to press several times) SCSI RAID promote the arrival of the menu will be provided. Menu when “S” button to specify an additional device stage is reached. Place the prepared floppy disk at this stage “Enter” to continue with.

SATA drives during Windows setup to identify the system you need to press F6 screen appears.
In this screen “S” button, the windows installation that you saved earlier to the floppy disk drive is provided to scan
Finally, this screen may come in more than one drive, you’ve set up the situation by checking the appropriate option “ENTER” key to continue.